燃煤电厂超低排放气态污染物监测技术综述

介绍了燃煤电厂超低排放气态污染物监测系统的采样系统和分析单元,分析了其各自的优缺点。对稀释抽取式、冷干抽取式和热湿抽取式3种采样方法,以及非分散红外吸收法(NDIR)、非分散紫外吸收法(NDUV)、紫外差分吸收法(DOAS)、紫外荧光法(UVF)和化学发光法(CL)5种分析方法进行对比。结果表明,冷干抽取式+紫外差分法以及稀释抽取式+紫外荧光法+化学发光法可以较好地符合燃煤电厂超低排放监测的要求。     

循环载荷下煤裂隙演化试验研究

为了研究循环载荷下的煤体裂隙演化特征，在不同应力水平和不同频率条件下分别进行煤样破坏力学及声发射试验。结果表明:应力-应变曲线呈疏-密-疏的变化特征，对应的振铃数柱状图呈U型；上限应力点的应变值、累积能量、撞击计数均随循环次数增加而上升，曲线呈倒S型；煤裂隙演化经历了原始裂隙闭合、新生裂隙稳定发育和裂纹贯穿破坏等3个不同阶段；循环载荷的应力水平和加载频率对煤体疲劳寿命的影响具有差异性，对煤体裂隙演化和破坏模式均有明显影响。     

Toward sustainable use of natural resources: Nexus between resource rents,affluence, energy intensity and carbon emissions in developing and transition economies

Sustainable use of natural resources would entail ensuring that derived economic benefits today do not undermine the welfare of generations to come. On this basis, this study examines the nexus between natural resource rents and carbon dioxide (CO₂) emissions disaggregated into production and consumption-based (i.e., trade-adjusted) CO₂ emissions for a selected panel of 45 developing and transition economies over the period 1995–2017. The empirical model also incorporates the impacts of population, affluence, and energy intensity. The results show that affluence increases production-based CO₂ emissions by 1.407%, with the EKC's predicted inverted U-shaped curve only explaining consumption-based CO₂ emissions. Economic reliance on natural resource rents and energy intensification contribute 0.022% and 0.766%, respectively, to CO₂ emissions embedded in territorial production inventories and 0.035% and 0.583%, respectively, to CO₂ emissions embedded in consumption inventories. The bootstrap non-causality test shows that historical data on each variable has significant predictive power for future CO₂ emissions from both sources. The historical information about natural resource rents has significant predictive power over the future levels of affluence and energy intensity. Clearly, the results show that the environmental impact of natural resource rents is stronger when CO₂ emissions are adjusted for trade and varies among the countries, with Bangladesh, Guinea, India, Malaysia, Mexico, Nigeria, Pakistan, Saudi Arabia, Vietnam, and Zimbabwe among the most affected countries. Overall, this study provides motivation for policies to keep the use of natural resources within sustainable limits.     

北京首都机场绿色滑行时间估算

采用北京首都机场2014年实际CDM地面放行数据确定航空器的污染物排放量与离场排队飞机数量和落地滑入飞机数量的强关联性,构建包含这两个解释变量为影响因素的多元线性回归模型,用以估算几种常见机型在首都机场地面运行时的最小污染物排放量和绿色滑行时间。对比实际污染物排放量与最小污染物排放量,得出首都机场离场地面污染物排放量远远超过最小污染物排放量。     

北京市典型废弃物焚烧源2010—2017年二NFDA1英排放特征和减排效果分析

分析2010—2017年北京市三类典型废弃物焚烧源的废气二NFDA1英排放监测数据,计算排放因子和排放量,评估减排政策成效,并分析不同排放源达标排放时同类物分布特征异同和变化规律,探讨影响排放的重要因素。结果表明: 5家焚烧源平均排放浓度为 0.008～0.069 ng/m³(以TEQ计,下同),废气二NFDA1英排放因子为 0.027～1.7 μg/t,2016年向空气中排放的二NFDA1英量为 0.002 5～0.058 g；生活垃圾、危险废物和医疗废物焚烧源的低、高氯代同类物质量分数比的平均值分别为接近于 0.5、大于0.5和小于0.5,危险废物焚烧源的 ∑PCDFs、∑PCDDs质量分数比的平均值大于2； 123478-HxCDF和123678-HxCDF质量浓度接近且线性相关,具有相近的生成机理和去除效率； I-TEQ变化趋势与∑PCDFs质量分数的变化趋势基本一致,活性炭喷射和布袋除尘的去除效率是影响二NFDA1英排放的重要因素之一；危险废物焚烧源HWI1随运行时间增加排放浓度增加,而及时更换烟道管壁有助于消除“记忆效应”的不良影响。     

不同火灾规模下隧道水幕线性喷水强度的研究

为了探究火源功率和水幕线性喷水强度对烟气特征参数和水幕阻烟隔热能力的影响，以全尺寸隧道为研究对象，采用FDS数值模拟方法，还原验证了前人使用的小尺寸模型，研究了20组工况下烟气特征参数变化的规律。研究结果表明:根据相似性原理还原后的全尺寸模型在相同工况下的模拟结果与小尺寸实验基本一致；水幕系统降低遮光率的效果随线性喷水强度增加而增强，当线性喷水强度增至一定程度时，遮光率和隔热效率无明显变化；对于中、大型规模火灾，水幕有效作用时间出现减少的情况；火源功率为5，20，30 MW的小、中、大规模的隧道火灾，综合考虑经济性和水幕效果，建议分别选择水幕的线性喷水强度为8，14，16 L/(s瘙
簚m)。     

我国污染物总量控制制度改革的思考

污染物总量控制制度是我国环境保护制度的重要组成部分。结合污染物总量控制制度的实施现状,分析实施过程中减排基数、核算体系、责任主体等方面存在的问题。提出,改革现行污染物总量控制制度,将总量控制与改革中的排污许可制相融合,落实企业主体责任,将总量指标与环境质量改善挂钩,建立差异化的减排核算体系,并加强日常监管,达到改善环境质量的目标。     

炼油厂厂界恶臭强度分级评估

石油炼制是产生恶臭污染的重点行业之一,恶臭强度是评估恶臭污染程度的重要参数。以炼油厂厂界大气特征污染物为研究对象,综合考虑检出率、嗅阈值和物质浓度3项指标,采用指标评分法筛选出厂界主要恶臭污染物硫化氢、氨、甲苯和二甲苯。基于韦伯-费希纳定律构建了恶臭强度分级评估方法,以某炼油厂为例进行了厂界恶臭强度评估,结果表明,厂界恶臭强度值为0.63,属于Ⅱ级(轻污染),硫化氢是恶臭强度的主要贡献源。应用感官测定法验证了该评估方法的可靠性。从恶臭管理的角度看,炼油厂在厂界达标排放的基础上应进一步实施恶臭污染综合治理措施,以改善周边的环境质量。     

300MW锅炉低NOx燃烧系统改造效果分析

针对日益严重的环境污染、锅炉热效率低等问题，阐述了燃煤锅炉炉内空间分级燃烧技术、煤粉浓淡高效分离技术改造项目和特点，提出了对燃烧器系统、一次风管道、二次风系统和空预器系统等系统进行具体的低氮改造措施。分析了300 MW燃煤锅炉低氮改造后的热经济性和安全性。经试验验证，1号锅炉低氮改造后，锅炉NOx 排放量大幅减少，排放浓度降到了280 mg／m3。     

Safety-related conclusions for the application of ultrasound in explosive atmospheres

International safety regulations such as EN 1127-1 consider ultrasound to be an ignition source. Currently, applications of ultrasound in explosive atmospheres have to comply with a threshold value of 1 mW/mm². However, it is unclear as to how this intensity has to be measured and, therefore, this threshold value is poorly defined. Moreover, it is based on theoretical estimations in analogy to other ignition sources and there are no publications or significant records on these estimations. Within a research project at PTB, it has now been investigated experimentally in relation to worst-case considerations including airborne ultrasound, focused MHz ultrasound in liquids and acoustic cavitation. On the basis of the results of the research it is now possible to revise the current regulations and to specify measures for safe operation of ultrasonic applications in explosive atmospheres. In this context, for ultrasound coupled directly to gaseous atmospheres a new threshold value of 170 dB (re. 20 μPa) can be suggested, and for ultrasonic applications in liquids, an augmentation can be made to the threshold to 400 mW/mm².